Schartec Wireless Receiver Set 230 V including 5 Remote Controls
The 230 V wireless receiver is ideal for retrofitting or converting electric gate operators for private use, especially for operators that do not have a 24 V power supply. The wireless receiver operates via pulse control but can also be switched to a hold contact if desired. The hold contact is advantageous if you want to connect household devices, such as a lamp, to the wireless receiver.
The two included wireless remote controls with 433 MHz rolling code encryption ensure secure signal transmission.
The wireless receiver has 2 channels, meaning it can control up to 2 different gate operators (industrial gate operators excluded) or other devices with one remote control.
Additionally, the external wireless receiver is equipped with two push buttons on the outside of the housing, allowing operation without a remote control. If you have 2 operators connected to the wireless receiver, it is not possible to use one remote control solely for channel 1 and another solely for channel 2. Each programmed remote control is always able to operate both channels (Button 1 = Channel 1 / Button 2 = Channel 2). Therefore, this wireless receiver is not suitable if you want to rent out your 2nd garage, as the tenant would also have access to your garage.
The Schartec wireless receiver with 230 V is not suitable for controlling roller shutters. You can still find a roller shutter control in our range.
Features:
- very easy to use (only two steps)
- Rolling code encryption (very secure)
- 2-channel (2 relay outputs)
- pulse or hold contact possible
- operation also possible without remote control via button on the housing
- high range (up to 50 m / depending on local conditions)
- resistant to radio interference
- remote control with attachment option for keyring
Exclusively compatible with Schartec remote controls:
- T6107 (Item number: ST201001)
- T3501 (Item number: ST201010)